Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-711003.png)
^
Remove screw -arrow- at wiring harness bracket.
CAUTION!
Press coolant pipe in direction of coolant pump using pry bar when removing coolant thermostat housing so that is not pulled off.
^
Remove coolant thermostat housing - 2 - while pressing coolant pipe - 1 - toward coolant pump with pry bar.
Installing
Installation is performed in the reverse order of removal, noting the following:
Note:
^
Replace seals.
^
Fill with coolant.
^
Connect battery.
Tightening Specifications
