Eos (1F7) V6-3.2L (BUB) (2008)
-
Remove the cylinder head cover. Refer to => [ Cylinder Head Cover ] See: Cylinder Head Assembly/Valve Cover/Service and Repair/Cylinder
Head Cover.
-
Remove chain tensioner - arrow - for the camshaft timing chain.
-
Disconnecting the following connectors:
‹› Camshaft adjustment valve 1 (N205)
‹› Camshaft adjustment valve 1 (exhaust) (N318)
‹› Camshaft Position (CMP) sensor (G40)
‹› CMP sensor 2 (G163)
‹› Mark the connector assignment to the component before disconnecting the connectors.
-
Free up the wiring harness.
-
Remove the front camshaft cover bolts - arrows - and cover.