Eos (1F7) V6-3.2L (BUB) (2008)
‹› The points - arrow A - on the intake and exhaust camshaft bearing caps face outward.
‹› Identification on bearing caps is legible when read from the intake side.
A - Intake Camshaft
-
Tighten the bearing caps 5 and 9 alternately and diagonally to 5 Nm + 45° (1/8) additional turn.
-
Install the bearing caps 1 and 13 and tighten them to 5 Nm 45° (1/8) additional turn.
-
Install the bearing cap 7 and tighten them to 5 Nm 45° (1/8) additional turn.
-
Install the bearing caps 3 and 11 and tighten them to 5 Nm 45° (1/8) additional turn.
B - Exhaust Camshaft