Eos (1F7) V6-3.2L (BUB) (2008)
- 1 - camshaft adjustment valve 1.
- 2 - camshaft adjustment valve 1 (exhaust).
-
Clean the sealing surfaces on the cover and on the cylinder head.
-
Lubricate the oil passage seal O-ring - 1 - and insert it in the cover.
-
Make sure the alignment sleeves - 2 and 3 - are inserted.
-
Install the seal - 4 - in the cover.
-
Clean the old sealing compound from the 3 mm holes in the cylinder head gasket - arrows -.
-
Fill the 3 mm holes in the cylinder head gasket with sealant (D 176 501 A1). Apply sealant (D 176 501 A1) to the sealing surfaces on the cover
and install the cover immediately.
-
Install the camshaft front cover bolts - arrows - and tighten lightly.