Eos (1F7) V6-3.2L (BUB) (2008)
Crankshaft: Service and Repair
Crankshaft Overview
Crankshaft Overview
1
Bearing Cap
‹› Bearing cap 1: vibration damper side.
‹› Bearing cap 5 with notches for the thrust washers.
‹› Retaining tabs on the bearing shells and cylinder block/bearing caps must align above one another.
2
Bolt
‹› 30 Nm + 180° (1/2) additional turn.
‹› Replace
‹› Two 90° additional turns is permitted.
3
Bearing Shells, 1 through 7
‹› For the bearing caps without oil grooves.
‹› For the cylinder block with the oil groove.
‹› Do not interchange used bearing shells.
4
Thrust Washer