Eos (1F7) V6-3.2L (BUB) (2008)
Sealing Flange, Engine Front: Service and Repair
Sealing Flange Assembly Overview
1 - 100 Nm + 1/2 turn (180 degree)
2 - Vibration damper
^
Use counter-holder tool T10069 to remove and install.
3 - 10 Nm
4 - Sealing flange
^
Coat sealing surfaces with sealant D 176 501 A1
^
With seal
5 - Cylinder block
6 - Sealing flange
^
Coat sealing surfaces with sealant D 176 501 A1
7 - Seal
^
Remove using pulling hook T20143/2
^
PTFE version of oil seal,
^
Identification: no inner coil spring
^
Do not additionally oil or grease sealing lip of oil seal
^
Before installing, remove oil remains from crankshaft journal with a clean cloth.
8 - Intermediate plate
9 - Dual mass flywheel
10 - 60 Nm + 1/4 turn (90 degree)
^
Replace