Eos (1F7) V6-3.2L (BUB) (2008)
Oil Filter Adapter: Locations
Oil Filter Bracket Assembly Overview
1 - Locking bolt, 15 Nm
^
If sealing ring is leaking cut open and replace.
2 - Oil pressure switch F1, 20 Nm
^
0.9 bar switch
^
If sealing ring is leaking cut open and replace.
3 - Oil filter bracket
^
With check valve
^
Opening pressure 0.05 bar pressure
4 - O-ring
^
Replace
^
Oil before assembling
5 - Oil cooler
^
Ensure sufficient clearance to surrounding components
6 - Seal
^
Replace
^
Oil before assembling
7 - Oil cooler cover, 25 Nm
8 - Oil cooler sealing ring
^
Replace
^
Note installation position
^
Oil before assembling
^
Insert into grooves on oil cooler