Eos (1F7) V6-3.2L (BUB) (2008)
Oil Filter Adapter: Service and Repair
Oil Filter Bracket
Oil Filter Bracket
Special tools, testers and auxiliary items required
^
Hose clamps up to 25 mm dia. 3094
^
Assembly tool T10118
Removing
CAUTION!
Cover cap of expansion tank with rag and open carefully, as hot steam i.e. hot coolant may escape when opening.
^
Open cap of coolant expansion tank.
^
Remove the Secondary Air Injection (AIR) Pump Motor V10.
^
Connect the coolant hoses - 2 - and - 3 - with hose clamps 3094.
^
Disconnect electrical connector - 1 - at oil pressure switch with assembly tool T10118.
^
Disconnect coolant hoses - 2 - and - 3 - at oil filter bracket.
^
Remove screws -arrows- and remove oil filter bracket.
Installing
Installation is performed in the reverse order of removal, noting the following:
Note:
^
Replace gaskets.
^
Fill with coolant.
Tightening Specifications