Eos (1F7) V6-3.2L (BUB) (2008)
‹› Replace
‹› Lubricate before assembling.
5
Oil Cooler
‹› Ensure sufficient clearance to surrounding components.
‹› See note in => [ Lubrication System ] See: Description and Operation/Lubrication System.
‹› Coolant hose connection diagram. Refer to => [ Coolant Hose Connection Diagram ] See: Cooling System/Diagrams.
6
Seal
‹› Replace
‹› Lubricate before assembling.
7
Oil Cooler Cover
‹› 25 Nm
8
Oil Cooler Seal
‹› Replace
‹› Note the installed position.
‹› Lubricate before assembling.
‹› Insert into the grooves on the oil cooler.
9
Bolt
‹› 23 Nm
10
Oil Filter Element
‹› Observe the change intervals.
‹› See note in => [ Lubrication System ] See: Description and Operation/Lubrication System.
11
Screw Cap
‹› 25 Nm
12
Oil Drain Plug
‹› 10 Nm
Oil Cooler Sealing Installed Position