Eos (1F7) V6-3.2L (BUB) (2008)
Timing Chain: Locations
Chain Drive Assembly Overview
1 - Control housing
^
Markings on control housing
^
Lightly lubricate contact surfaces of oil seals before installing
^
Check control housing strainer for soiling before installation
2 - 8 Nm
^
Insert using locking fluid D 000 600 A2
3 - Camshaft roller chain
^
Mark direction of rotation before removing (installation position)
4 - Exhaust camshaft adjuster
^
Identification: 32A
^
Only rotate engine with camshaft adjuster installed
5 - Intermediate shaft
6 - Tensioning rail
7 - Pivot pin, 18 Nm
8 - Chain tensioner, 40 Nm
^
Only rotate engine with chain tensioner installed
9 - Seal
^
Replace if damaged or leaking
10 - Chain sprocket