Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-656003.png)
-
Install the chain tensioner.
-
Release the locking splines of the chain tensioner using a small screwdriver and press the tensioning rail against the chain tensioner.
-
Install the chain tensioner in this position and tighten the bolts - arrow - to 8 Nm.
Installing the Camshaft Timing Chain
Conditions
‹› The camshaft adjusters are installed
‹› The camshaft lobes - A - for cylinder 1 must face each other
