Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-656005.png)
-
Install the small sprocket into the timing chain. The mark - B - must align with the center copper colored chain link - A -.
-
Install the small sprocket together with the timing chain onto the intermediate shaft. Installation is possible in one position only.
-
Lock the vibration damper using (T10069).
-
Tighten the new intermediate shaft bolt - arrow - to 60 Nm + 90° (1/4) additional turn. (The additional turn may be performed in several steps.)
