Eos (1F7) V6-3.2L (BUB) (2008)
-
Install the small sprocket onto the intermediate shaft. Installation is possible in one position only.
-
Tight the intermediate shaft bolt - arrow - hand tight because the small sprocket must be removed one more time.
-
Install the chain tensioner.
-
Release the locking splines of the chain tensioner using a small screwdriver and press the tensioning rail against the chain tensioner.
-
Install the chain tensioner in this position and tighten the bolts - arrow - to 8 Nm.
Installing the Camshaft Timing Chain