Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-656016.png)
-
Lubricate the oil passage seal O-ring - 1 - and insert it in the cover.
-
Make sure the alignment sleeves - 2 and 3 - are inserted.
-
Install the seal - 4 - in the cover.
-
Clean the old sealing compound from the 3 mm holes in the cylinder head gasket - arrows -.
-
Fill the 3 mm holes in the cylinder head gasket with sealant (D 176 501 A1). Apply sealant (D 176 501 A1) to the sealing surfaces on the cover
and install the cover immediately.
-
Install the camshaft front cover bolts - arrows - and tighten lightly.