Eos (1F7) V6-3.2L (BUB) (2008)
^
Place the timing chain on the camshaft adjuster in such a way that the 2 individual copper color chain sprockets - CA - align with the markings on
the camshaft adjuster. It is possible that the intake camshaft adjuster will have to be rotated slightly.
^
Install the small intermediate shaft chain sprocket into the timing chain. The marking - B - must align with the center copper color chain link - A -.
^
Install the small chain sprocket together with the timing chain on to intermediate shaft. Installation is possible in one position only.
^
Lock vibration damper using counter-holder tool T10069.
^
Tighten the new intermediate shaft chain sprocket bolt -arrow- to 60 Nm + 90 degree (1/4 turn). (The additional turn may be performed in several
steps.)
^
Check the position of the camshaft to the intermediate shaft one more time.
^
Milled drive chain sprocket tooth must align with bearing joint - arrow B -.