Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-686004.png)
‹› The casting edge on the engine mount bracket - 2 - must be parallel to the engine mount - 1 -.
‹› For the engine mount tightening specifications, refer to => [ Fastener Tightening Specifications ] See: Specifications/Engine Assembly - Fastener
Tightening Specifications.
-
Install the ribbed belt. Refer to => [ Ribbed Belt ] See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Ribbed Belt.
-
Fill the cooling system. Refer to => [ Draining and Filling ] See: Cooling System/Service and Repair/Procedures/Draining and Filling.
