Eos (1F7) V6-3.2L (BUB) (2008)
Exhaust Manifold: Service and Repair
Exhaust Manifold, Front Exhaust Pipes With Catalytic Converters and Front Mufflers Assembly
Overview
Exhaust Manifold, Front Exhaust Pipes With Catalytic Converters And Front Mufflers Assembly Overview
Front exhaust pipe with catalytic converters and front muffler, removing and installing.
1
-
Connector
-
Black, 6-pin
2
-
Heated oxygen sensor G39, 50 Nm
-
Bank 1, sensor 1
-
Installed in the exhaust gas stream of cylinders 1, 2 and 3
-
Only use hot bolt paste to grease thread; do not let paste get onto slits of oxygen sensor body.
3
-
Heated Oxygen Sensor (H02S) 2 G108, 50 Nm
-
Bank 2, sensor 1
-
Installed in the exhaust gas stream of cylinders 4, 5 and 6
-
Only use hot bolt paste to grease thread; do not let paste get onto slits of oxygen sensor body
4
-
Connector
-
Brown, 6-pin
5
-
40 Nm
-
Replace
6
-
Oxygen Sensor (02S) 2 Behind Three Way Catalytic Converter (TWC) G131, 50 Nm
-
Bank 2, sensor 2
-
Installed in the exhaust gas stream of cylinders 4, 5 and 6
-
Only use hot bolt paste to grease thread; do not let paste get onto slits of oxygen sensor body
-
Use ring spanner set for oxygen sensor 3337 for removal and installation
7
-
Connector
-
Brown, 4-pin
8
-
Oxygen sensor behind three way catalytic converter G130, 50 Nm
-
Bank 1, sensor 2
-
Installed in the exhaust gas stream of cylinders 1, 2 and 3