Eos (1F7) V6-3.2L (BUB) (2008)
7
Rear Muffler
‹› Original equipment as one unit with the center muffler. For repairs, replace each separately.
‹› Separating the exhaust system. Refer to => [ Center and Rear Muffler, Separating ] See: Center and Rear Muffler, Separating.
‹› Install the exhaust system free of stress, refer to => [ Exhaust System, Installing ] See: Service and Repair/Removal and Replacement/Exhaust
System, Installing.
8
Suspended Mount with Retaining Loops
‹› Replace if damaged.
9
Bolt
‹› 25 Nm
10
Rear Clamping Sleeve
‹› Align the exhaust system before tightening. Refer to => [ Exhaust System, Installing ] See: Service and Repair/Removal and
Replacement/Exhaust System, Installing.
‹› Tighten the bolts evenly.
‹› Clamping sleeve location, refer to => [ Rear Clamping Sleeve
Installed Position ] See: Description and Operation/Clamping Sleeves.
11
Center Muffler
‹› Original equipment as one unit with the rear muffler. For repairs, replace each separately.
‹› Separating the exhaust system. Refer to => [ Center and Rear Muffler, Separating ] See: Center and Rear Muffler, Separating.
‹› Install the exhaust system free of stress. Refer to => [ Exhaust System, Installing ] See: Service and Repair/Removal and Replacement/Exhaust
System, Installing.
12
Front Clamping Sleeve
‹› Align the exhaust system before tightening. Refer to => [ Exhaust System, Installing ] See: Service and Repair/Removal and
Replacement/Exhaust System, Installing.
‹› Clamping sleeve location, refer to => [ Clamping Sleeves ] See: Description and Operation/Clamping Sleeves.
‹› Tighten the bolts evenly.
13
Nut
‹› 25 Nm
Vacuum Control Unit, Individual Components