Eos (1F7) V6-3.2L (BUB) (2008)
Control Assembly: Adjustments
Air Distribution Door Adjuster
Removing
-
Remove left footwell vent. Refer to => [ Left Footwell Vent ] See: Air Register/Service and Repair
-
Unclip flexible shaft from adapter for controls. Refer to => [ Flexible Shaft, through 05.18.08 ] See: Service and Repair/Climatic A/C System
With Manual Control.
-
Unscrew bolts - 1 - and remove adjusting unit for air distribution doors
Installing
-
Arrows on toothed gears must align with each other.
-
Position adjusting unit for air distribution doors and tighten bolts - 1 -.
-
Clip in the flexible shaft to adapter for controls. Refer to => [ Flexible Shaft, through 05.18.08 ] See: Service and Repair/Climatic A/C System
With Manual Control.
‹› When installing flexible shaft, adapter and air distribution rotary switch on controls for hot air and fresh air must have a specific position to each
other, otherwise it will malfunction.
‹› After installing, function of air distribution door must be checked.
Checking: