Eos (1F7) V6-3.2L (BUB) (2008)
-
Push the bracket - 1 - toward the brake pedal - arrow - and secure it there using a cable tie.
-
Mark connector - C - to control motor (danger of interchange with other connectors of same construction).
-
Disconnect connector - C - on Temperature Regulator Door Motor (V68).
-
Remove cover - A -.
-
Remove securing bolts - D - and remove Temperature Regulator Door Motor (V68) - B -.
-
Disengage control motor lever - E - from connecting rod - F -.
Installing
Installation is carried out in the reverse order. When doing this note the following:
-
Install the wiring harness so that it cannot come in contact with any moving parts (e.g. the actuating arm of the control motor).
‹› After installing Temperature Regulator Door Motor ( V68), recirculating air door must be checked for function.
-
Checking: Vehicle Diagnosis, Testing and Information System (VAS 5051B) (or succeeding model)
-
Replace: Initiate Basic Setting function with Vehicle Diagnosis, Testing and Information System (VAS 5051B). Refer to=> [ Checking and
Adjusting Components ] See: Description and Operation/Climatronic A/C System With Automatic Control
Recirculation Door Motor
Climatic A/C System with Manual Control