volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Climatronic A/C System With Automatic Control|Page 6076 > < Climatronic A/C System With Automatic Control|Page 6074
Page 5
background image

Recirculation Door Motor

Removing

-

Remove Recirculation Door Motor (V113). Refer to => [ Fresh/Recirculating Air Door Motor ] See: Air Door/Air Door Actuator / Motor/Service
and Repair/Fresh/Recirculating Air Door Motor

Air Distribution Door Motor, From 05.25.08

Climatic A/C System with Manual Control

Air Distribution Door Motor, from 05.25.08

Removing

-

Remove the instrument panel.

-

Disconnect the connector on the Air Distribution Door Motor (V428).

-

Remove the screws - 1 - and then remove the Air Distribution Door Motor (V428).

Installing

Install in reverse order of removal.

‹› After installing the Air Distribution Door Motor ( V428) check the door function.

‹› Initiate "Basic Setting" function with Vehicle Diagnosis, Testing and Information System (VAS 5051B). Refer to => [ Checking and Adjusting

Components ] See: Description and Operation/Climatronic A/C System With Automatic Control.

Center Outlet Temperature Sensor

Climatic A/C System with Manual Control

Center Outlet Temperature Sensor

Removing

-

Remove side cover of instrument panel on the left side.

Climatronic A/C System With Automatic Control|Page 6076 > < Climatronic A/C System With Automatic Control|Page 6074