Eos (1F7) V6-3.2L (BUB) (2008)
-
Disconnect harness connector from Center Outlet Temperature Sensor (G191).
-
Unscrew Center Outlet Temperature Sensor (G191 ) - 1 - from instrument panel.
Installing
Install in reverse order of removal.
Footwell Outlet Temperature Sensor
Climatic A/C System with Manual Control
Footwell Outlet Temperature Sensor
Removing
-
Remove left footwell vent. Refer to => [ Left Footwell Vent ] See: Air Register/Service and Repair.
-
Disconnect connector at Footwell Outlet Temperature Sensor (G192) - 1 -.
-
Rotate Footwell Outlet Temperature Sensor (G192 ) 90° and remove from housing.
Installing
Install in reverse order of removal.