volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Control Assembly, HVAC|Diagrams > < A/C - A/C Inop. After Control Unit Replacement|Page 6028
Page 1
background image

Control Assembly: All Technical Service Bulletins
A/C - Does Not Get Cold Enough

87 07 17 

Nov. 14, 2007 

2016734

Vehicle Information

Condition

Air Conditioning Not Cold

Air conditioning is not cold after replacing or unplugging the A/C control unit or ambient temperature sensor.

Technical Background

If the ambient temperature sensor or a/c control unit -E87- is unplugged or replaced for any reason, the ambient temperature sensor -G17- must be reset
in order to function properly.

Production Solution

No production change required.

Service

To reset/calibrate the A/C control unit perform one of the following methods:

^

Drive vehicle at 25 mph (41 kph).

^

With vehicle in PARK, let engine run for 20 minutes.

Warranty

Information only.

Required Parts and Tools

No Special Parts required.

No Special Tools required.

Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair
Manuals for the latest information.

Control Assembly, HVAC|Diagrams > < A/C - A/C Inop. After Control Unit Replacement|Page 6028