Eos (1F7) V6-3.2L (BUB) (2008)
-
Pull connector release - 2 - up.
-
Remove connector.
-
Rotate bulb approx. 90 degrees counter-clockwise and remove from reflector.
Installing
Install in reverse order of removal, noting the following:
NOTE: The cornering light bulb obtains its installation position by the different recesses, wide recess - A - and narrow recess - B -.
-
Guide cornering light bulb into headlamp housing so attachments on bulb socket fit into recesses - A - and - B - on reflector.
-
Rotate bulb approx. 90 degrees clockwise as far as stop.
-
Connect connector - 2 -.
NOTE: When installing the housing cover, ensure the gasket is properly seated. Water intrusion will damage headlamp.
-
Check headlamp for function.