Eos (1F7) V6-3.2L (BUB) (2008)
-
Insert new gas discharge lamp so that retaining tab on reflector - A - fits into recess - B arrows - on gas discharge lamp.
-
Carefully press gas discharge lamp - B - into retaining tabs - C - until lamp engages.
-
Release gas discharge lamp by turning locking mechanism - 1 -.
Install in reverse order of removal, noting the following:
NOTE:
-
Ensure seal is seated properly when installing housing cover with High-intensity Gas Discharge Lamp Control Module. Water intrusion will
damage headlamp.
-
If a headlamp with automatic headlamp range control is removed, headlamp basic setting procedure must always be performed after installing.
-
Check headlamp for function.
-
Check and adjust headlamp aim if necessary.