Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-408004.png)
There must now be a minimum of 5 mm free space all around between universal joint - 2 - and cutout of bulkhead.
Tightening Specifications
Rear Axle Camber, Adjusting
Rear Axle Camber, Adjusting
Special tools, testers and auxiliary items required
‹› Shock absorber set (T10001)
‹› Insert tool 18 (T10179)
-
Loosen nut - A - of threaded connection of upper transverse link at subframe.
-
Set camber by turning eccentric bolt - B - using (T10001).
