Eos (1F7) V6-3.2L (BUB) (2008)
-
Slide the coolant pipe into the hole in the cylinder block.
-
Install the coolant thermostat housing. Refer to => [ Coolant Thermostat Housing ] See: Engine, Cooling and Exhaust/Cooling
System/Thermostat/Service and Repair/Coolant Thermostat Housing.
-
Install the A/C compressor.
-
Install the ribbed belt. Refer to => [ Ribbed Belt ] See: Drive Belt/Service and Repair/Ribbed Belt.
-
Fill the cooling system. Refer to => [ Draining and Filling ] See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair/Procedures/Draining and Filling.
Tightening Specifications