Eos (1F7) V6-3.2L (BUB) (2008)
Note:
^
Both camshaft adjusters (identification: "24E" on intake side and "32A" on exhaust side) can only bolted in one position on the camshaft
mountings -arrows- by an alignment pin.
^
Now turn sensor wheel - 1 - on intake camshaft adjuster clockwise - in direction of arrow - until it stops and hold the adjuster in this position.
Note:
^
If the intake camshaft adjuster is attached to the camshaft, the adjuster must be rotated left accordingly with the chain sprocket and then the
camshaft roller chain must be routed.
^
Ensure the camshaft roller chain rests against the guide rail - 1 - tautly and does not hang through.
Adjuster must be able to be inserted easily on intake camshaft with camshaft roller chain installed tautly and be tightened hand-tight.