Eos (1F7) V6-3.2L (BUB) (2008)
‹› Check tire pressure sensor for loose or damaged parts. If threaded connections are loose, union nut, valve insert, seal, sealing washer and valve cap
must be replaced by new parts from repair set.
‹› If tire pressure sensor is damaged, then it must be replaced completely. Refer to => [ Tire Pressure Sensor ] See: Sensors and Switches - Wheels
and Tires/Tire Pressure Sensor/Service and Repair/Tire Pressure Sensor.
Tires, Mounting
CAUTION!
‹› Pay attention to the instructions for warming-up cold tires to the minimum mounting temperature. Refer to => [ Wheels and Tires,
Mounting Assembly Requirements ] See: Testing and Inspection/Wheels and Tires, Mounting Assembly Requirements.
‹› Note the safety precautions. Refer to => [ Safety Precautions for Run-Flat Tires, Removing and Mounting ] See: Service
Precautions/Safety Precautions For Run-Flat Tires, Removing and Mounting.
-
Coat rim flanges, tire beads and inside of upper tire beads thoroughly with tire mounting paste.
-
Turn disc wheel on tire mounting device so that tire valve/tire pressure sensor - 1 - stands on opposite side of mounting head - 2 -.
-
Let the tire dismounting/mounting machine run clockwise.
-
Mounting of the lower bead ends before the tire valve/tire pressure sensor - arrow - to prevent damage to tire pressure sensor.