Eos (1F7) V6-3.2L (BUB) (2008)
‹› The connectors of the relay carrier on the vehicle electrical system control module can only be disconnected when the securing latch is in the
OPEN position.
‹› The number of connectors and therefore relays depends on the vehicle equipment.
‹› All connectors can only be connected in one position and therefore do not need to be labeled.
-
Release connectors - 2 - and disconnect them.
-
Push securing latch - 1 - for the connectors of the vehicle electrical system control module in the - direction of the arrow - into the OPEN
position.
‹› The connectors of the vehicle electrical system control module can only be disconnected when the securing latch has been set to the OPEN
position beforehand.
‹› The number of connectors on the vehicle electrical system control module depends on the vehicle equipment.
‹› All connectors can only be connected in one position and therefore do not need to be labeled.
-
Release connectors - 2 - and disconnect them.
-
Release the vehicle electrical system control module - 2 - relay carrier by unclipping the catches - 1 - in - direction of arrow A - from the
bracket.