Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1413005.png)
‹› Additional information:
-
Connect the Vehicle Diagnosis, Testing & information System (VAS5051B). Refer to => [ Vehicle Diagnosis Tester, Connecting ] See:
Powertrain Management/Computers and Control Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Vehicle
Diagnosis Tester, Connecting.
Vehicle Electrical System, General Repair Information
Vehicle Electrical System, General Repair Information
When disconnecting and connecting battery, the procedure must be followed as described in the Repair Information.
Some tools are supplied with a tool safety clip, which is slid over the tool points after using the tool, in order to protect other workers
from injuries and tool points from damage.
‹› Observe the current notes in the corresponding Repair Information for all repairs.
‹› Observe country-specific regulations.
‹› Before working on electrical system, battery ground (GND) strap must be disconnected. By disconnecting the battery ground (GND) strap (current
disruption), the electrical system is guaranteed to be safe to work on. Disconnection of the battery positive terminal is only required for removal of
the battery.
‹› Before commencing repair work, always eliminate cause of damage, e.g. sharp body edges, faulty components, corrosion etc.
‹› Further information, e.g. installing and removing the individual components can be found in the appropriate Repair Information.
‹› Soldering is not permissible for repairs to the vehicle electrical system.
‹› Repair to the wiring harnesses and connectors on the vehicle electrical system may be performed only with the wiring harness repair kit (VAS
1978 B) and with previous versions. Only the yellow wires from the (VAS 1978 B) may be used.
