Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-891003.png)
-
Pry up the locking mechanism - 2 - slightly.
-
Slide the ECM out of the bracket in the - direction of the arrow -.
-
Disconnect the rear connector from the ECM.
Installing
-
Connect and lock the rear connector to the ECM.
-
Slide the ECM onto the bracket.
-
Connect and lock the front connector to the ECM.
-
Slide the protective housing onto the bracket.
-
Tighten the shear bolts - 1 - uniformly until the bolt heads shear off.
-
Install the plenum chamber facing wall, plenum chamber cover and windshield wiper arms.
