Eos (1F7) V6-32L (BUB) (2008) - Catalytic Converter Locations
Catalytic Converter: Locations
Exhaust Manifold, Front Exhaust Pipes With Catalytic Converters And Front Mufflers Assembly Overview
Front exhaust pipe with catalytic converters and front muffler, removing and installing.
1
-
Connector
-
Black, 6-pin
2
-
Heated oxygen sensor G39, 50 Nm
-
Bank 1, sensor 1
-
Installed in the exhaust gas stream of cylinders 1, 2 and 3
-
Only use hot bolt paste to grease thread; do not let paste get onto slits of oxygen sensor body.
3
-
Heated Oxygen Sensor (H02S) 2 G108, 50 Nm
-
Bank 2, sensor 1
-
Installed in the exhaust gas stream of cylinders 4, 5 and 6
-
Only use hot bolt paste to grease thread; do not let paste get onto slits of oxygen sensor body
4
-
Connector
-
Brown, 6-pin
5
-
40 Nm
-
Replace
6
-
Oxygen Sensor (02S) 2 Behind Three Way Catalytic Converter (TWC) G131, 50 Nm
-
Bank 2, sensor 2
-
Installed in the exhaust gas stream of cylinders 4, 5 and 6
-
Only use hot bolt paste to grease thread; do not let paste get onto slits of oxygen sensor body
-
Use ring spanner set for oxygen sensor 3337 for removal and installation
7
-
Connector
-
Brown, 4-pin
8
-
Oxygen sensor behind three way catalytic converter G130, 50 Nm
-
Bank 1, sensor 2
-
Installed in the exhaust gas stream of cylinders 1, 2 and 3
-
Only use hot bolt paste to grease thread; do not let paste get onto slits of oxygen sensor body
-
Use ring spanner set for oxygen sensor 3337 for removal and installation
9
-
Connector