Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-939002.png)
-
Remove the right front part of the wheel housing liners.
-
Remove the three bolts - arrows - on the right floor panel cover.
-
Disconnect the connectors for the HO2S behind Three Way Catalytic Converter (TWC) (G130) - 1 - and Oxygen Sensor (O2S) 2 behind TWC
(G131) - 2 - at the underbody.
-
Remove the connection coupling from the bracket and free up wiring to the HO2S behind TWC (G130) and O2S 2 behind TWC (G131).
-
Remove the front exhaust pipe to exhaust manifold nuts - arrows - accessible from the bottom.
