Eos (1F7) V6-3.2L (BUB) (2008)
Evaporative Emission Control Canister: Service and Repair
Evaporative Emission Canister
Special tools, testers and auxiliary items required
‹› Engine/Transmission Jack (V.A.G 1383 A)
‹› T Bar and Socket 10 mm (3185)
Removing
-
Remove the center and rear mufflers.
-
Remove the heat shield fasteners - arrows - and shield.
-
For supporting purposes, place the (V.A.G 1383 A ) under the rear subframe.
-
Loosen the bolts - arrows - for the rear subframe and unscrew them approximately 20 mm.
-
Slowly lower the rear subframe using the (V.A.G 1383 A ).
-
Disconnect the vent lines - A - by pressing the release buttons.