Eos (1F7) V6-3.2L (BUB) (2008)
Variable Induction Control Module: Service and Repair
Throttle Valve Control Module
Removing
-
Pull off the air guide cover - 1 -, disengage the clips sideways to do so.
-
Unclip the air duct - 2 -.
-
Remove the air filter housing and connecting hose, while doing this remove the bolt - A -, disconnect the connector - B - and remove the spring
clip - C -. When reinstalling, observe the mark - D -.
-
Disconnect the electrical connection to the throttle valve control module (J338).
-
Remove the throttle valve control module - arrows - bolts and module.