Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1015002.png)
-
Apply a thin bead of lubricating paste (G 052 141 A2) around the ignition coil sealing hose - arrow -. The bead must be 1 to 2 mm thick.
-
To install, insert ignition coil with power output stage into the corresponding spark plug shaft so that straight connector sides fit with each other -
arrows -.
-
Slide on the (T10095 A) from the straight connector side in the - direction of the arrow - and press the ignition coil with power output stage onto
the spark plugs.
