Eos (1F7) V6-3.2L (BUB) (2008)
-
Remove mounting bolt - arrow - and remove Headlamp Range Control Module J431 - 1 - from bracket - 2 -.
Installing
Install in reverse order of removal, noting the following:
-
Insert Headlamp Range Control Module J431 - 3 - with retaining clip - 2 - in bracket - 1 -.
-
Engage harness connector - 1 - by pressing securing bracket - 2 - in - direction of arrow -.
NOTE: After installing a new Headlamp Range Control Module J431, it must be coded.