Eos (1F7) V6-3.2L (BUB) (2008)
Headlamp Alignment Control Module: Programming and Relearning
Headlamp Range/Cornering Lamp Control Module, Coding
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051A.
-
In Vehicle Diagnostic, Testing and Information System VAS 5051A, select operating mode "Guided Fault Finding".
-
Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
-
Body
-
Electrical Equipment
-
01 - On Board Diagnostic (OBD) capable systems
-
Automatic Headlamp Range/Cornering Lamp Control
-
Automatic headlamp range control functions
-
Code Control Module for AFS Light Control
NOTE: If Headlamp Range/Cornering Lamp Control Module J745 is coded, basic setting of headlamps must be performed after coding.