Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-127004.png)
New Beetle:
^
Plug pods connector end of VAS 6103/2 onto seat harness going to the PODS.
(A5) Jetta, Passat Sedan, GTII Rabbit and Eos:
^
Use adapter cable VAS 6103/2-1 and connect it to VAS 6103/2 cable as shown above.
^
Connect remaining end of VAS 6103/2-1 to seat harness going to the PODS.
New Beetle:
^
Move passenger seat height adjustment to fully upright position.
^
Identify 10 pin Seat Occupant Recognition Module connector (1) underthe right front edge of seat.
TIP
^
Disconnect black Seat Occupant Recognition Module harness connector from bracket.
