Eos (1F7) V6-3.2L (BUB) (2008)
Air Bag: Removal and Replacement
Driver Airbag
Driver Airbag
‹› Removal and installation of airbag unit is described for multi-function steering wheel.
‹› The screwdriver mentioned in the following should be about 175 mm long and have a blade width of 7 mm.
Removing
CAUTION!
Observe safety precautions for working on airbags. Refer to => [ Airbags Safety Precautions ].
-
Disconnect vehicle battery.
-
Adjust steering wheel height so that it is located in the highest position.
-
Adjust steering wheel depth (reach) so it is in the fully extended position.
-
Turn steering wheel into the position depicted.
-
Insert a screwdriver into hole on rear side of steering wheel until it stops (approx. 8 mm).
-
Turn the screwdriver in the direction of passenger's side door - arrow -; this unlocks the airbag unit locking frame on the right side of the steering
wheel.
-
Turn steering wheel 180° and disengage airbag unit locking mechanism on left side of steering wheel as described.
-
Turn steering wheel back 90° into center position.
-
Remove airbag unit from steering wheel.