Eos (1F7) V6-3.2L (BUB) (2008)
-
Press belt guide down diagonally out of catch - arrow B -.
-
Remove bolt - 2 - (40 Nm).
-
Remove belt inertia reel - 3 - from mount in body.
-
Thread seat belt with belt guide - 1 -, safety belt latching tongue and belt anchor through belt relay - 4 -.
Installing
-
Perform the steps used for removal in reverse order.
Rear Seat Belt Latches
Rear Seat Belt Latches
Removing
-
Remove seat bench. Refer to => [ Bench Seat ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seats.
-
Remove two nuts - 1 - (40 Nm) and remove safety belt latches - 2 - and - 3 -.