Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1789001.png)
Seat Belt Tensioner: Service Precautions
Belt Tensioners Safety Precautions
Belt Tensioners Safety Precautions
CAUTION!
‹›
Testing, removing, installing and repair work may only be performed by qualified personnel.
‹›
Belt tensioner components may not be opened nor repaired; always use new parts (risk of injury).
‹›
Belt tensioners that were subject to hard blows or have been dropped on the floor, must not be installed in a vehicle.
‹›
Belt tensioners that are mechanically damaged (dents, cracks) must always be replaced.
‹›
Storage and transport is subject to laws governing explosive materials.
‹›
Belt tensioners should be installed immediately after removing them from the shipping package.
‹›
An impact wrench may not be used to remove the belt tensioner.
‹›
Belt tensioner is to be returned to shipping package when work is interrupted.
‹›
It is not acceptable to leave belt tensioner unattended.
‹›
The belt tensioner may not be treated with grease, cleaning agents, or similar materials, and may not be exposed, even briefly, to
temperatures above 212° F (100° C).
‹›
The pyrotechnic propellant has no expiration date, i.e. it has unlimited service life and is maintenance-free.
