Eos (1F7) V6-3.2L (BUB) (2008)
-
After paint has dried, reattach decoupling ring (black silicon ring) to sensor head.
Assignment Of Sensor Bracket To Component Location In Bumper Cover
Assignment Of Sensor Bracket To Component Location In Bumper Cover
Sensor brackets are designed in different shapes and must be matched to the respective component location in the bumper cover. To simplify assignment,
the sensor brackets are marked on the inside with a letter - arrow -. Each sensor bracket also has two code tabs - 1 - which mate to the component
location. Observe the alignment of sensor connections in the respective assignment.
Sensor bracket assignment on inside of rear bumper cover:
NOTE: The letters are located on the sensor brackets.
A -
left center
B -
right center
C -
right outer
I
-
left outer.
Sensor Bracket, Attaching In Bumper Cover