Eos (1F7) V6-3.2L (BUB) (2008)
Tow Sensor: Service and Repair
Vehicle Inclination Sensor
‹› To remove the sensor, anti-theft warning system must be deactivated. Refer to => [ Anti-Theft Alarm System, Activating and Deactivating ] See:
Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and Inspection/Programming and Relearning/Anti-Theft Alarm
System, Activating and Deactivating.
Removing:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Remove the glove compartment.
-
Disconnect harness connector - 1 - from Vehicle Inclination Sensor (G384).
-
Disengage catch - arrow - and pull sensor out of bracket for Comfort System Central Control Module (J393 ).
Installing:
-
Install in reverse order of removal.