Eos (1F7) V6-3.2L (BUB) (2008)
Brake Light Switch: Service and Repair
Brake Light Switch, from 11.06.05
On vehicles before 11.06.05, the brake light switch was located on the brake pedal.
Removing
-
Remove the engine cover.
-
On some vehicles, the intake hose must be removed
-
Disconnect the connector - 1 - from the brake light switch.
-
Remove bolt - 2 - from the master cylinder.
-
Remove the brake light switch - 3 - downward and off from the master cylinder and remove it from the retaining tab at the top - 4 -.
Installing
-
Installation is performed in the reverse order of removal.