Volkswagen Workshop Service and Repair Manuals

‹› The color marked (yellow) band - arrow - must be located in viewing window - 1 -.

‹› If a new Steering Angle Sensor (G85) is installed, then the work procedure Basic Setting must be performed, refer to => [ Steering Angle Sensor,

Basic Setting ] See: Sensors and Switches - Steering and Suspension/Sensors and Switches - Steering/Steering Angle Sensor/Testing and
Inspection/Programming and Relearning.

Lock Cylinder

Steering Column Switch Components, To 10.09

Lock Cylinder

CAUTION!
‹› When disconnecting and connecting battery, the procedure must be followed as described in the Repair Information => [

Disconnecting and Connecting Battery In Engine Compartment ] See: Starting and Charging/Battery/Service and Repair/Removal
and Replacement/Disconnecting and Connecting Battery In Engine Compartment or => [ Disconnecting and Connecting Batteries In
Luggage Compartment ] See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Disconnecting and
Connecting Batteries In Luggage Compartment.

‹› Steering lock may be destroyed.

‹› If steering lock is operated without lock cylinder, it locks and must be replaced.

‹› Steering lock must not be operated without lock cylinder.

Removing:

-

Disconnect battery. Refer to => [ Disconnecting and Connecting Battery In Engine Compartment ] See: Starting and Charging/Battery/Service and
Repair/Removal and Replacement/Disconnecting and Connecting Battery In Engine Compartment or => [ Disconnecting and Connecting Batteries