Eos (1F7) V6-3.2L (BUB) (2008)
Power Window Safety Switch: Service and Repair
Driver Interior Locking Button
NOTE: Interior Lock Switch Illumination L99 and Drivers Interior Locking Indicator Lamp K174, which cannot be replaced separately, are integrated
in Drivers Interior Locking Button E308.
Removing
-
Turn off the ignition and all electrical components.
-
Remove drivers side door trim.
-
Disconnect electrical connection - 1 -.
-
Disengage retaining tabs - arrows - and remove interior locking switch from installation frame.
Installing
Install in reverse order of removal.