Eos (1F7) V6-3.2L (BUB) (2008)
Starter Motor: Service and Repair
Starter Wire (B+)
Starter Wire (B+)
Assembly Work In Luggage Compartment
The starter wire (B+) - 1 - is routed from the starter batteries in the luggage compartment, through an opening in the body on the left side of the
luggage compartment floor, forward to the engine compartment, refer to => [ Battery System Overview ] See: Battery/Service and Repair/Removal
and Replacement/Battery System Overview and => [ Starter Wire Component Locations Overview ] See: Starter Wire Component Locations
Overview.
-
Disconnect wiring connection on Battery Interrupt Igniter (N253) - 1 -.
‹› Usage and safety information for working on Battery Interrupt Igniter, refer to => [ Battery Interrupt Igniter Usage and Safety Information ] See:
Battery/Service Precautions/Technician Safety Information/Battery Interrupt Igniter Usage and Safety Information.
‹› Battery Interrupt Igniter components and component locations, refer to => [ Battery Interrupt Igniter ] See: Battery/Description and
Operation/Battery Interrupt Igniter.
The starter wire - 2 - is secured in the luggage compartment floor with a clip - 3 -.
Underbody Assembly Work
-
Remove underbody trim.
The starter wire (B+) - 3 - is secured directly behind the body grommet on the luggage compartment floor - 4 - with a bracket and a rubber buffer - 2 -.
The bracket securing nuts - 5 - are tightened to 5 Nm.
- Arrow 1 - points in direction of travel.