Eos (1F7) V6-3.2L (BUB) (2008)
Steering Column Control Module: Service and Repair
Steering Column Electronic Control Module
Steering Column Electronic Control Module
Removing
-
Remove driver's side airbag unit.
-
Remove driver's side airbag unit.
-
Disconnect both harness connectors at control module.
-
Using a suitable screwdriver, carefully pry out control module - arrow -.
Installing
Install in reverse order of removal.
-
Code Control unit for the steering column electronics, fit component parts Multifunction Steering Wheel, refer to => [ Multifunction Steering
Wheel ] See: Powertrain Management/Computers and Control Systems/Information Bus/Testing and Inspection/Component Tests and General
Diagnostics/On Board Diagnostics.